|
|  |

THREE ARM KNOBS
These three arm knobs are available in heat resistant Phenolic material and impact resistant materials. Some three arm knobs feature Thermoplastic material with a textured surface. P/N's 3025, 3035 and 3040 are molded in glossy Phenolic. P/N's 3022, 3036 and 3041 are molded in a thermoplastic material. If you don't see the exact part your application requires, contact us for other models and styles.
Note: Click on Part No. to see individual Picture or click here to see Picture Brochure
|
KEY: |
F.I. = FEMALE INSERT |
|
|
S.S. = SET SCREW |
| |
P.H. = PLAIN HOLE |
|
|
P.S. = PROJECTING MAIL STUD |
|
Part No. |
Diameter |
Height |
Hub |
Mountings |
|
3022 |
7/8" |
3/4" |
1/2" |
8-32, 10-24, 10-32, 1/4-20 F.I.; 8-32 x 9/16", 10-32 x 3/4" P.S.; 1/4-20 x 3/4" Brass P.S. |
|
3025 |
1-1/8" |
3/4" |
1/2" |
8-32, 10-24, 10-32, 1/4-20 F.I.; 1/4-20 Thru F.I.; 8-32 x 1/2", 10-24 x 7/8", 10-32 x 7/16", 1", 1/4-20 x 5/16", 1/2", 9/16", 3/4", 3/8" x 1-1/2", 1-3/4" P.S. |
|
3035 |
1-1/2" |
7/8" |
5/8" |
(Phenolic) 10-32, 1/4-20, 5/16-18 F.I.; 1/4-20, 5/16-18 F.I.; 1/4-20 x 9/16", 1/4-20 x 3/4", 5/16-18 x 5/16", 3/4", 1-3/4" P.S. |
|
3040 |
2" |
1" |
3/4" |
1/4-20, 5/16-18, 3/8-16, 3/8-24 F.I.; 5/16-18 3/8-16 Thru F.I.; 1/4-20 x 9/16", 5/16-18 x 3/4" & 1", 3/8-16 x 5/8", 3/8-16 x 3/4" & 1-1/2" P.S. |
|
3041 |
2" |
1" |
3/4" |
1/4-20 Thru F.I.; 1/4-20, 3/8-16 F.I.; 5/16-18 x 3/4", 5/16-18 x 1", 3/8-16 x 3/4 & 3/8-16 x 1" P.S. |
|
3045 |
2-1/2" |
1-1/4" |
13/16" |
Nylon 5/16-18 & 3/8-16 F.I.; 5/16-18 & 3/8-16 Thru F.I. |
|
3070 |
11/16" |
5/8" |
7/16" |
10-24, 1/4-20 F.I. |
|
3071 |
15/16" |
13/16" |
5/8" |
1/4-20, 5/16-18 F.I.; 10-24 x 1/2" P.S. |
|
3072 |
1-1/4" |
7/8" |
3/4" |
1/4-20, 5/16-18, 3/8-16 F.I.; 1/4-20 x 3/4", 5/8", 1" With or Without Inlays |
|
3073 |
1-5/8" |
7/8" |
3/4" |
1/4-20, 5/16-18, 3/8-16 F.I.; 5/16-18 Thru F.I. |
|
3075 |
2-1/8" |
7/8" |
1" |
5/16-18, 1/4-20, 3/8-16, 3/8-24, 1/2-13 F.I.; 3/8-24 x 9", 1/2-13 x 1-1/2 P.S., 3/8-24-3/4" w/6-32 Tapped Tip P.S. With or Without Inlays |
|